Key Features
- total power is 230W
- 6KV lightning protection
- Lead security transmission
- Up to 250 meters long transmission
Price Change Declaimer
Payment Options
Product Image Declaimer
Product Information Declaimer
| Main Features | |
| Type | Switch |
| Advanced Functions | 6KV Lightning Protection Store and forward:Yes CCTV： 1-8 ports support QoS，If multiple IP cameras are connected to the switch, you are recommended to enable this mode and connect the G1 or SFP1 port of this switch to the upstream device，like the monitoring computer. This ensures smoother monitoring video playback. Standard： The switch’s functions are similar with a common unmanaged switch’s and all the ports of the switch can communicate with each other. VLAN： In this mode, 1-16 ports of the switch cannot communicate with each other, but can communicate with the G1 and SFP1 ports. It can be used to isolate broadcast storms and DHCP broadcasts. Extend： In this mode, the data rate of 1-8 port is limited to 10 Mbps, whereas the maximum transmission distance of the port is increased to 250 meters. All the ports of the switch can communicate with each other. |
| Network Standard | IEEE 802.3、 IEEE 802.3u、IEEE 802.3x、IEEE 802.3af |
| Data Transmission Rate | 16 10/100 Mbps Base-TX ports(Data/Power) 1 10/100/1000 Mbps Base-T port(Data) |
| Environment | Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing |
| Method | Wired |
| Ports | 16 10/100 Mbps Base-TX ports(Data/Power) 1 10/100/1000 Mbps Base-T port(Data) 1 1000 Mbps Base-X SFP port |
| MAC Address Table | 4K MAC |
| Interface | 16 10/100Base-TX ports(Data/Power) 1 10/100/1000Base-T port(Data) 1 1000Base-X SFP port |
| Power Supply | PoE supply management: PoE supply management: Port 1 to Port 16 support IEEE802.3at/af POE standard Input Power: AC：100-240V～ 50/60Hz Power Consumption: in full configuration：<150W PoE Max Power Supply：135W |
| LED | 16*Link/Act per device 1*G1 Link/Act per device 1*SFP Link/Act per device 1*PoE-MAX per device 1*Power per device |
| Physical Specification | |
| Dimensions | 294 x 178 x 44 mm ( W x D x H ) |
| Warranty | |
| Manufacturing Warranty | 1 Year |
Tenda TEF1118P 16 150W 10/100Mbps PoE +1 Gigabit/SFP Slots Switch.
TEF1118P-16-150W has 16 10/100 Mbps Base-TX RJ45 ports, 1 10/100/1000 Mbps Base-T RJ45 port, and 1 1000 Mbps Base-X SFP port in addition to 16 10/100 Mbps Base-TX RJ45 ports. Ports 1-16 are IEEE 802.3af and 802.3at compliant, and each port can support a maximum PoE power output of 30 W. The switch has a maximum PoE power output of 135 W and can supply power when exchanging data via CAT5 cables with APs, IP cameras, and IP phones. It also includes simple management modes such as CCTV, VLAN, and Extend to assist in lowering IP terminal cabling costs. In real-world projects, APs or cameras are frequently installed outside or in a higher position, increasing the likelihood of lightning strikes on the cameras and PoE switches. As a result, some of the equipment may be damaged, and the entire local area network (LAN) may be rendered inoperable. Tenda TEF11 series switches are designed with professional lightning protection in mind, with a 6KV port and power supply thunder protection. These two protection designs can effectively inhibit lightning currents from network cables and power supplies, which is equivalent to adding security Walls to the entire network monitoring system. Furthermore, the test standards are far higher than the state CCC requirements. During thunderstorms, the monitoring network can also provide stable and reliable services to the monitoring network, ensuring normal image transmission. QoS is supported by 1-8 CCTV ports. If you have multiple IP cameras connected to the switch, you should enable this mode and connect the switch's G1 or SFP1 port to an upstream device, such as a monitoring computer. This results in more fluid monitoring of video playback. Standard: The switch's functions are similar to those of a standard unmanaged switch, and all of the switch's ports can communicate with one another. VLAN: In this mode, the switch's 1-24 ports cannot communicate with one another, but they can communicate with the G1 and SFP1 ports. It is useful for isolating broadcast storms and DHCP broadcasts.
Questions
Have question about this product? Get specific details about this product from expert.No questions have been asked about this product.
